Performance motorcycle parts
CBR1000 and Fireblade Smog Caps
For Honda 2006 - 2009 CBR1000RR and Honda Fireblade. Cleans up area around spark plugs, removes all hoses, spark plug changes made easy, and they rate high on “bling” meter. These are for...
Endurance Race Lighting Kit
Endurance Racing Light Kit BRG’s 24-hour Endurance Race SV650 headlight kit. Developed by Zoran and KC for the 24-hour race at Willow Springs. They are removable for daylight hours and...
EX500 Belly Pan
EX500 Belly Pan Most tracks and clubs require fluid retaining belly pans to protect from spills. This cost effective system comes complete with mounting hardware, pre-attached Dzus fasteners, and ready to bolt...
EX500 Frame Savers
BRG’s frame saver kit for the EX500 covers the front part of the bike. The sliders are longer because of the profile of the bike. We also went a step further and...
EX500 Lightened Fly Wheel
EX500 ignition/charging rotors are lightened to reduce rotating mass, allowing harder pulls on acceleration. Your starter still works with this unit. Since this is a cut down stock piece, there is...
EX500 Motor Mounts
Removes all flex out of your EX500, improving motor, and frame performance. Mounts are made to be as light as possible without sacrificing strength and durability. Add shoulder bolts for down...
EX500 Shoulder Bolts
BRG’s down tube shoulder bolts really stiffen the frame to allow the suspension to do its job. Combined with BRG’s motor mounts, they are the best bang for your buck for...
EX500 Swing Arm Conversion to 17" Wheel
This is one of the most important modifications to an EX500 race bike. Check the rules for your class first! A 17" front and 17" rear gives you the best...
Shock Bottle Holder
BRG Racing Products started manufacturing in 1994. Through the years, we have been able to adapt the kit to fit just about any motorcycle, including Buell's, Suzuki's, Yamaha's, Honda's Triumph's, and many other applications.
Suzuki SV650 Battery Box
BRG's Battery Box Kit was designed to do two things; take as much weight off as possible, and move some of that weight forward and lower on the bike to help with...
Suzuki SV650 Body Work Mounts
This is BRG's mounting kit for Sharkskinz bodywork. Designed to take care of any ground clearance problems you may having with the lowers of your Sharkskinz body work. You may need...
Suzuki SV650 Carbon Dash
This is just one example of our carbon fiber dash. Everyone has their own idea what they want on the dash, so please give us a call or send an...
Suzuki SV650 Fairing Bracket
The BRG front fairing bracket for the Second Gen SV650 weighs in at a mere 214 grams. This is the lightest front fairing bracket on the market today. The reason it...
Suzuki SV650 First Gen Big Axle Kit
This is the BRG's big axle kit for the SV650 First Gen. We found that after building some motors with pretty good horse power (anything 90HP and above) effects the...
Suzuki SV650 First Gen Lightened Brake Arm
This is the BRG First Gen SV650 lightweight brake arm. As you can see it is a direct replacement for the stock brake arm. Here again, it just looks like...
Suzuki SV650 First GEN Sub Frame
The BRG subframe weighs 1.5 pounds. The pictures show you what we do to make it as light as possible. We make all our own parts for the subframe in...
Suzuki SV650 First Gen Tank Bracket
This is the BRG first Gen gas tank bracket. It originally was designed to work with just the BRG subframe, but we have had a number of our customers inform...
Suzuki SV650 Frame Savers
We have looked at a lot of frame savers that are on the market, and were not happy with where they mounted to the frame. The BRG SV650 Frame Saver...
Suzuki SV650 Fuse Box Holders
We made these brackets to work on on the BRG SV650 sub frame. It just looks cleaner than using zip ties.